Showing 1–16 of 89 results

  • 50ml tip bottom centrifuge tube – sand content test bottle – Laboratory petroleum centrifuge tube

    Basic use
    (1) Take liquid or solid reagents.
    (2) Heat a small amount of solid or liquid.
    (3) Prepare a small amount of gas reactor.
    (4) Collect a small amount of gas.
    (5) Dissolve a small amount of gas, liquid or solid solute.
    (6) centrifugal as a container.
    (7) Used as a reaction container for a small amount of reagents, used at room temperature or heating

    Matters needing attention
    (1) When filling the solution, it does not exceed 1/2 of the tube capacity, and when heating, it does not exceed 1/3 of the tube capacity.
    (2) When adding liquid to the test tube with the dropper, it should be suspended and added, and should not be extended into the tube mouth.
    (3) To take the block solid with tweezers to pick up to the mouth of the test tube, and then slowly erect the test tube to make the solid slide into the bottom of the test tube, can not make the solid fall directly, to prevent the bottom of the test tube from breaking.
    (4) Use tube clips for heating, and the tube mouth should not face people. When heating the test tube containing solids, the mouth of the tube is slightly downward, and the tilt is about 45° when heating the liquid.
    (5) The heat should be uniform, so as not to burst or burst the test tube.
    (6) Can not be cooled after heating to prevent rupture.
    (7) When heating, preheat to prevent the tube from sudden heat and burst.
    (8) When heating, there should be no water on the outer wall of the test tube to prevent the test tube from bursting when suddenly cold.
    (9) After heating, do not wash the test tube before it is cooled to room temperature.
    (10) When using the test tube clamp to take the test tube, the test tube clamp from the bottom of the test tube to the upper part of the test tube, if the length of the test tube is divided into three equal parts, the test tube clamp on the end of the tube mouth within one third of the part is reasonable.
    (11) Heating application of external flame.

    Read moreDone

  • 7103 Single concave slide microscope 50 single concave slides per box can be nailed to make multiple concave slides

    Detailed description:
    1) Classification by material: float glass and quartz glass
    2) Article number classification:
    7101 frosted edge
    7102 raw edges
    7103 single concave
    7104 double concave
    7105 Single head single side frosted edge
    7105-1 Single head single side frosted raw edge
    7106 Double side single frosted edge
    7107 Single head double face frosted edge
    7107-1 Double side single side frosted raw edge
    7108 Double face scrub
    7109 Color frosting
    7110 single front frosted
    7111 Full face scrub on both sides

    3) According to whether to wash classification: wash glass and wash glass

    4) Classification by sanding Angle :45°C edging slide, 90° right Angle color slide and 8-sided chamfer slide

    5) According to the type of anti-slip classification: polylysine slide, silicon anti-slip slide and positive charge anti-slip slide

    6) Classification according to packaging specifications :50 pieces and 72 pieces

    7) Classification by polishing: polished side slide and unpolished slide

    8) Classification according to whether it can be marked; Mark slide and ordinary slide

    Mark slide: The new type discloses a mark slide, which belongs to the technical field of microscopic detection equipment. One end of the slide is provided with a layer of pressure paper, and the pressure paper is provided with a layer of plastic coating. The utility model has the advantages of simple structure and convenient use, and the specimen number can be directly recorded on the plastic laminating film with a pen, and the color number will be displayed on the pressing paper. Its number will not be unclear due to daubing or soaking during the detection process, and it is not necessary to write the number on the label paper and stick it on the slide, so that the operation is easier.

    9) Classification of the number of combinations of slides: single slide and composite slide

    Composite slide: The invention discloses a composite slide processing technology, which comprises the following steps: (1) a flat slide is taken, one or more hollow holes are processed on it, and the surface is coated; ② Another flat slide is processed into a flat slide with the same thickness; ③ The composite slide is obtained by using hot pressing or optical gluing to compound the two flat slides together. The processing technology of the invention has the advantages of simple processing, accuracy and high yield.

    10) Classification by use: microslides and cell culture slides

    11) Classified by thickness: 1mm,2mm,3mm, etc., the thickest can reach 8㎜

    Read moreDone

  • 7105 Frosted slides for microscopes 50 slides per box can be stapled to a special size

    Detailed description:
    1) Classification by material: float glass and quartz glass
    2) Article number classification:
    7101 frosted edge
    7102 raw edges
    7103 single concave
    7104 double concave
    7105 Single head single side frosted edge
    7105-1 Single head single side frosted raw edge
    7106 Double side single frosted edge
    7107 Single head double face frosted edge
    7107-1 Double side single side frosted raw edge
    7108 Double face scrub
    7109 Color frosting
    7110 single front frosted
    7111 Full face scrub on both sides

    3) According to whether to wash classification: wash glass and wash glass

    4) Classification by sanding Angle :45°C edging slide, 90° right Angle color slide and 8-sided chamfer slide

    5) According to the type of anti-slip classification: polylysine slide, silicon anti-slip slide and positive charge anti-slip slide

    6) Classification according to packaging specifications :50 pieces and 72 pieces

    7) Classification by polishing: polished side slide and unpolished slide

    8) Classification according to whether it can be marked; Mark slide and ordinary slide

    Mark slide: The new type discloses a mark slide, which belongs to the technical field of microscopic detection equipment. One end of the slide is provided with a layer of pressure paper, and the pressure paper is provided with a layer of plastic coating. The utility model has the advantages of simple structure and convenient use, and the specimen number can be directly recorded on the plastic laminating film with a pen, and the color number will be displayed on the pressing paper. Its number will not be unclear due to daubing or soaking during the detection process, and it is not necessary to write the number on the label paper and stick it on the slide, so that the operation is easier.

    9) Classification of the number of combinations of slides: single slide and composite slide

    Composite slide: The invention discloses a composite slide processing technology, which comprises the following steps: (1) a flat slide is taken, one or more hollow holes are processed on it, and the surface is coated; ② Another flat slide is processed into a flat slide with the same thickness; ③ The composite slide is obtained by using hot pressing or optical gluing to compound the two flat slides together. The processing technology of the invention has the advantages of simple processing, accuracy and high yield.

    10) Classification by use: microslides and cell culture slides

    11) Classified by thickness: 1mm,2mm,3mm, etc., the thickest can reach 8㎜

    Read moreDone

  • All kinds of biological experimental microscope slide adhesion slide anti-slip slide positive charge pathology slide single-side spraying technology

    Detailed description:
    1) Classification by material: float glass and quartz glass
    2) Article number classification:
    7101 frosted edge
    7102 raw edges
    7103 single concave
    7104 double concave
    7105 Single head single side frosted edge
    7105-1 Single head single side frosted raw edge
    7106 Double side single frosted edge
    7107 Single head double face frosted edge
    7107-1 Double side single side frosted raw edge
    7108 Double face scrub
    7109 Color frosting
    7110 single front frosted
    7111 Full face scrub on both sides

    3) According to whether to wash classification: wash glass and wash glass

    4) Classification by sanding Angle :45°C edging slide, 90° right Angle color slide and 8-sided chamfer slide

    5) According to the type of anti-slip classification: polylysine slide, silicon anti-slip slide and positive charge anti-slip slide

    6) Classification according to packaging specifications :50 pieces and 72 pieces

    7) Classification by polishing: polished side slide and unpolished slide

    8) Classification according to whether it can be marked; Mark slide and ordinary slide

    Mark slide: The new type discloses a mark slide, which belongs to the technical field of microscopic detection equipment. One end of the slide is provided with a layer of pressure paper, and the pressure paper is provided with a layer of plastic coating. The utility model has the advantages of simple structure and convenient use, and the specimen number can be directly recorded on the plastic laminating film with a pen, and the color number will be displayed on the pressing paper. Its number will not be unclear due to daubing or soaking during the detection process, and it is not necessary to write the number on the label paper and stick it on the slide, so that the operation is easier.

    9) Classification of the number of combinations of slides: single slide and composite slide

    Composite slide: The invention discloses a composite slide processing technology, which comprises the following steps: (1) a flat slide is taken, one or more hollow holes are processed on it, and the surface is coated; ② Another flat slide is processed into a flat slide with the same thickness; ③ The composite slide is obtained by using hot pressing or optical gluing to compound the two flat slides together. The processing technology of the invention has the advantages of simple processing, accuracy and high yield.

    10) Classification by use: microslides and cell culture slides

    11) Classified by thickness: 1mm,2mm,3mm, etc., the thickest can reach 8㎜

    Read moreDone

  • All kinds of experimental instruments special-shaped special material glass frosting and punching process customized glass

    Some product manufacturing process description:

    Tempered glass
    It is a prestressed glass made of ordinary flat glass after reprocessing.

    One-way seeing glass
    One-way perspective glass is a type of glass with a high reflectance to visible light.

    High pressure glass
    High pressure resistant glass refers to the special glass that the overall structure of the glass is still complete and does not break under a certain pressure impact.

    High temperature resistant glass
    High temperature resistant glass is also called heat-resistant glass, belonging to the silicate glass series

    Frosted glass
    It is also frosted on top of ordinary flat glass. The general thickness is more than 9 percent, and the thickness is more than 5 or 6 percent.

    Sandblasted glass
    The performance is basically similar to frosted glass, and different frosted sand is blasted.

    Embossed glass
    It is a flat glass made by calendering method. Its biggest feature is the opacity of light

    Bulletproof glass
    In fact, it is a kind of laminated glass, but the glass composed of tempered glass with high strength is mostly used, and the number of laminated glass is relatively large.

    Hot bending glass
    A curved glass made of high quality flat glass heated and softened in a mold and then annealed.

    Read moreDone

  • Arabian shisha straw glass pipe fittings

    Identification method
    1: Appreciate the light and shadow effect of colored glaze crafts,
    2: Not different Angle thickness and color of light refraction, can present a three-dimensional visual effect.
    3: Appreciate the natural flow of color and feel the pure beauty revealed in the “breath” of the glass.
    4: The transparency of the glass, should not be too pure too bright, need to have a certain level of difference and finish, otherwise it will lose its dynamic vitality of the beauty.
    5: Feel the beauty of artistic conception brought by the perfect combination of overall shape and color, beauty and creative idea.
    6: Appreciate the national culture (non-folk customs) and structural characteristics contained in ancient glass from the perspective of craft.
    7: The ancient process determines that there are no two exactly the same glass in the world, the so-called “heavenly work” said is the uniqueness of glass products, carefully taste the color flow of different glass, you will find different artistic conception.

    Read moreDone

  • Arabian water bottle White sandblasted mini hookah bar KTV mini hookah

    Identification method
    1: Appreciate the light and shadow effect of colored glaze crafts,
    2: Not different Angle thickness and color of light refraction, can present a three-dimensional visual effect.
    3: Appreciate the natural flow of color and feel the pure beauty revealed in the “breath” of the glass.
    4: The transparency of the glass, should not be too pure too bright, need to have a certain level of difference and finish, otherwise it will lose its dynamic vitality of the beauty.
    5: Feel the beauty of artistic conception brought by the perfect combination of overall shape and color, beauty and creative idea.
    6: Appreciate the national culture (non-folk customs) and structural characteristics contained in ancient glass from the perspective of craft.
    7: The ancient process determines that there are no two exactly the same glass in the world, the so-called “heavenly work” said is the uniqueness of glass products, carefully taste the color flow of different glass, you will find different artistic conception.

    Read moreDone

  • Arsenic tester for testing hydrogen arsenide generator 100ml150ml device for measuring arsenic

    Basic use
    (1) Take liquid or solid reagents.
    (2) Heat a small amount of solid or liquid.
    (3) Prepare a small amount of gas reactor.
    (4) Collect a small amount of gas.
    (5) Dissolve a small amount of gas, liquid or solid solute.
    (6) centrifugal as a container.
    (7) Used as a reaction container for a small amount of reagents, used at room temperature or heating

    Matters needing attention
    (1) When filling the solution, it does not exceed 1/2 of the tube capacity, and when heating, it does not exceed 1/3 of the tube capacity.
    (2) When adding liquid to the test tube with the dropper, it should be suspended and added, and should not be extended into the tube mouth.
    (3) To take the block solid with tweezers to pick up to the mouth of the test tube, and then slowly erect the test tube to make the solid slide into the bottom of the test tube, can not make the solid fall directly, to prevent the bottom of the test tube from breaking.
    (4) Use tube clips for heating, and the tube mouth should not face people. When heating the test tube containing solids, the mouth of the tube is slightly downward, and the tilt is about 45° when heating the liquid.
    (5) The heat should be uniform, so as not to burst or burst the test tube.
    (6) Can not be cooled after heating to prevent rupture.
    (7) When heating, preheat to prevent the tube from sudden heat and burst.
    (8) When heating, there should be no water on the outer wall of the test tube to prevent the test tube from bursting when suddenly cold.
    (9) After heating, do not wash the test tube before it is cooled to room temperature.
    (10) When using the test tube clamp to take the test tube, the test tube clamp from the bottom of the test tube to the upper part of the test tube, if the length of the test tube is divided into three equal parts, the test tube clamp on the end of the tube mouth within one third of the part is reasonable.
    (11) Heating application of external flame.

    Read moreDone

  • Baked flower with patterned glass straw

    Identification method
    1: Appreciate the light and shadow effect of colored glaze crafts,
    2: Not different Angle thickness and color of light refraction, can present a three-dimensional visual effect.
    3: Appreciate the natural flow of color and feel the pure beauty revealed in the “breath” of the glass.
    4: The transparency of the glass, should not be too pure too bright, need to have a certain level of difference and finish, otherwise it will lose its dynamic vitality of the beauty.
    5: Feel the beauty of artistic conception brought by the perfect combination of overall shape and color, beauty and creative idea.
    6: Appreciate the national culture (non-folk customs) and structural characteristics contained in ancient glass from the perspective of craft.
    7: The ancient process determines that there are no two exactly the same glass in the world, the so-called “heavenly work” said is the uniqueness of glass products, carefully taste the color flow of different glass, you will find different artistic conception.

    Read moreDone

  • Beauty ice ball Ice massage face ice therapy spa beauty salon glass crystal ball Large size

    Identification method
    1: Appreciate the light and shadow effect of colored glaze crafts,
    2: Not different Angle thickness and color of light refraction, can present a three-dimensional visual effect.
    3: Appreciate the natural flow of color and feel the pure beauty revealed in the “breath” of the glass.
    4: The transparency of the glass, should not be too pure too bright, need to have a certain level of difference and finish, otherwise it will lose its dynamic vitality of the beauty.
    5: Feel the beauty of artistic conception brought by the perfect combination of overall shape and color, beauty and creative idea.
    6: Appreciate the national culture (non-folk customs) and structural characteristics contained in ancient glass from the perspective of craft.
    7: The ancient process determines that there are no two exactly the same glass in the world, the so-called “heavenly work” said is the uniqueness of glass products, carefully taste the color flow of different glass, you will find different artistic conception.

    Read moreDone

  • Beauty Salon Medical Beauty Pore cleaning blackhead acne pipette Beauty pipette glass straw

    Basic use
    (1) Take liquid or solid reagents.
    (2) Heat a small amount of solid or liquid.
    (3) Prepare a small amount of gas reactor.
    (4) Collect a small amount of gas.
    (5) Dissolve a small amount of gas, liquid or solid solute.
    (6) centrifugal as a container.
    (7) Used as a reaction container for a small amount of reagents, used at room temperature or heating

    Matters needing attention
    (1) When filling the solution, it does not exceed 1/2 of the tube capacity, and when heating, it does not exceed 1/3 of the tube capacity.
    (2) When adding liquid to the test tube with the dropper, it should be suspended and added, and should not be extended into the tube mouth.
    (3) To take the block solid with tweezers to pick up to the mouth of the test tube, and then slowly erect the test tube to make the solid slide into the bottom of the test tube, can not make the solid fall directly, to prevent the bottom of the test tube from breaking.
    (4) Use tube clips for heating, and the tube mouth should not face people. When heating the test tube containing solids, the mouth of the tube is slightly downward, and the tilt is about 45° when heating the liquid.
    (5) The heat should be uniform, so as not to burst or burst the test tube.
    (6) Can not be cooled after heating to prevent rupture.
    (7) When heating, preheat to prevent the tube from sudden heat and burst.
    (8) When heating, there should be no water on the outer wall of the test tube to prevent the test tube from bursting when suddenly cold.
    (9) After heating, do not wash the test tube before it is cooled to room temperature.
    (10) When using the test tube clamp to take the test tube, the test tube clamp from the bottom of the test tube to the upper part of the test tube, if the length of the test tube is divided into three equal parts, the test tube clamp on the end of the tube mouth within one third of the part is reasonable.
    (11) Heating application of external flame.

    Read moreDone

  • Bio lab HD ultra white leave-in microscope slide

    Detailed description:
    1) Classification by material: float glass and quartz glass
    2) Article number classification:
    7101 frosted edge
    7102 raw edges
    7103 single concave
    7104 double concave
    7105 Single head single side frosted edge
    7105-1 Single head single side frosted raw edge
    7106 Double side single frosted edge
    7107 Single head double face frosted edge
    7107-1 Double side single side frosted raw edge
    7108 Double face scrub
    7109 Color frosting
    7110 single front frosted
    7111 Full face scrub on both sides

    3) According to whether to wash classification: wash glass and wash glass

    4) Classification by sanding Angle :45°C edging slide, 90° right Angle color slide and 8-sided chamfer slide

    5) According to the type of anti-slip classification: polylysine slide, silicon anti-slip slide and positive charge anti-slip slide

    6) Classification according to packaging specifications :50 pieces and 72 pieces

    7) Classification by polishing: polished side slide and unpolished slide

    8) Classification according to whether it can be marked; Mark slide and ordinary slide

    Mark slide: The new type discloses a mark slide, which belongs to the technical field of microscopic detection equipment. One end of the slide is provided with a layer of pressure paper, and the pressure paper is provided with a layer of plastic coating. The utility model has the advantages of simple structure and convenient use, and the specimen number can be directly recorded on the plastic laminating film with a pen, and the color number will be displayed on the pressing paper. Its number will not be unclear due to daubing or soaking during the detection process, and it is not necessary to write the number on the label paper and stick it on the slide, so that the operation is easier.

    9) Classification of the number of combinations of slides: single slide and composite slide

    Composite slide: The invention discloses a composite slide processing technology, which comprises the following steps: (1) a flat slide is taken, one or more hollow holes are processed on it, and the surface is coated; ② Another flat slide is processed into a flat slide with the same thickness; ③ The composite slide is obtained by using hot pressing or optical gluing to compound the two flat slides together. The processing technology of the invention has the advantages of simple processing, accuracy and high yield.

    10) Classification by use: microslides and cell culture slides

    11) Classified by thickness: 1mm,2mm,3mm, etc., the thickest can reach 8㎜

    Read moreDone

  • Biolab slide 7107 frosted edge high quality blood test microscope glass material

    Detailed description:
    1) Classification by material: float glass and quartz glass
    2) Article number classification:
    7101 frosted edge
    7102 raw edges
    7103 single concave
    7104 double concave
    7105 Single head single side frosted edge
    7105-1 Single head single side frosted raw edge
    7106 Double side single frosted edge
    7107 Single head double face frosted edge
    7107-1 Double side single side frosted raw edge
    7108 Double face scrub
    7109 Color frosting
    7110 single front frosted
    7111 Full face scrub on both sides

    3) According to whether to wash classification: wash glass and wash glass

    4) Classification by sanding Angle :45°C edging slide, 90° right Angle color slide and 8-sided chamfer slide

    5) According to the type of anti-slip classification: polylysine slide, silicon anti-slip slide and positive charge anti-slip slide

    6) Classification according to packaging specifications :50 pieces and 72 pieces

    7) Classification by polishing: polished side slide and unpolished slide

    8) Classification according to whether it can be marked; Mark slide and ordinary slide

    Mark slide: The new type discloses a mark slide, which belongs to the technical field of microscopic detection equipment. One end of the slide is provided with a layer of pressure paper, and the pressure paper is provided with a layer of plastic coating. The utility model has the advantages of simple structure and convenient use, and the specimen number can be directly recorded on the plastic laminating film with a pen, and the color number will be displayed on the pressing paper. Its number will not be unclear due to daubing or soaking during the detection process, and it is not necessary to write the number on the label paper and stick it on the slide, so that the operation is easier.

    9) Classification of the number of combinations of slides: single slide and composite slide

    Composite slide: The invention discloses a composite slide processing technology, which comprises the following steps: (1) a flat slide is taken, one or more hollow holes are processed on it, and the surface is coated; ② Another flat slide is processed into a flat slide with the same thickness; ③ The composite slide is obtained by using hot pressing or optical gluing to compound the two flat slides together. The processing technology of the invention has the advantages of simple processing, accuracy and high yield.

    10) Classification by use: microslides and cell culture slides

    11) Classified by thickness: 1mm,2mm,3mm, etc., the thickest can reach 8㎜

    Read moreDone

  • Biological laboratory adhesion slide 45 degree chamfer does not hurt hand adhesion slide

    Detailed description:
    1) Classification by material: float glass and quartz glass
    2) Article number classification:
    7101 frosted edge
    7102 raw edges
    7103 single concave
    7104 double concave
    7105 Single head single side frosted edge
    7105-1 Single head single side frosted raw edge
    7106 Double side single frosted edge
    7107 Single head double face frosted edge
    7107-1 Double side single side frosted raw edge
    7108 Double face scrub
    7109 Color frosting
    7110 single front frosted
    7111 Full face scrub on both sides

    3) According to whether to wash classification: wash glass and wash glass

    4) Classification by sanding Angle :45°C edging slide, 90° right Angle color slide and 8-sided chamfer slide

    5) According to the type of anti-slip classification: polylysine slide, silicon anti-slip slide and positive charge anti-slip slide

    6) Classification according to packaging specifications :50 pieces and 72 pieces

    7) Classification by polishing: polished side slide and unpolished slide

    8) Classification according to whether it can be marked; Mark slide and ordinary slide

    Mark slide: The new type discloses a mark slide, which belongs to the technical field of microscopic detection equipment. One end of the slide is provided with a layer of pressure paper, and the pressure paper is provided with a layer of plastic coating. The utility model has the advantages of simple structure and convenient use, and the specimen number can be directly recorded on the plastic laminating film with a pen, and the color number will be displayed on the pressing paper. Its number will not be unclear due to daubing or soaking during the detection process, and it is not necessary to write the number on the label paper and stick it on the slide, so that the operation is easier.

    9) Classification of the number of combinations of slides: single slide and composite slide

    Composite slide: The invention discloses a composite slide processing technology, which comprises the following steps: (1) a flat slide is taken, one or more hollow holes are processed on it, and the surface is coated; ② Another flat slide is processed into a flat slide with the same thickness; ③ The composite slide is obtained by using hot pressing or optical gluing to compound the two flat slides together. The processing technology of the invention has the advantages of simple processing, accuracy and high yield.

    10) Classification by use: microslides and cell culture slides

    11) Classified by thickness: 1mm,2mm,3mm, etc., the thickest can reach 8㎜

    Read moreDone

  • Biological laboratory adhesion slide 90° right Angle color slide

    Detailed description:
    1) Classification by material: float glass and quartz glass
    2) Article number classification:
    7101 frosted edge
    7102 raw edges
    7103 single concave
    7104 double concave
    7105 Single head single side frosted edge
    7105-1 Single head single side frosted raw edge
    7106 Double side single frosted edge
    7107 Single head double face frosted edge
    7107-1 Double side single side frosted raw edge
    7108 Double face scrub
    7109 Color frosting
    7110 single front frosted
    7111 Full face scrub on both sides

    3) According to whether to wash classification: wash glass and wash glass

    4) Classification by sanding Angle :45°C edging slide, 90° right Angle color slide and 8-sided chamfer slide

    5) According to the type of anti-slip classification: polylysine slide, silicon anti-slip slide and positive charge anti-slip slide

    6) Classification according to packaging specifications :50 pieces and 72 pieces

    7) Classification by polishing: polished side slide and unpolished slide

    8) Classification according to whether it can be marked; Mark slide and ordinary slide

    Mark slide: The new type discloses a mark slide, which belongs to the technical field of microscopic detection equipment. One end of the slide is provided with a layer of pressure paper, and the pressure paper is provided with a layer of plastic coating. The utility model has the advantages of simple structure and convenient use, and the specimen number can be directly recorded on the plastic laminating film with a pen, and the color number will be displayed on the pressing paper. Its number will not be unclear due to daubing or soaking during the detection process, and it is not necessary to write the number on the label paper and stick it on the slide, so that the operation is easier.

    9) Classification of the number of combinations of slides: single slide and composite slide

    Composite slide: The invention discloses a composite slide processing technology, which comprises the following steps: (1) a flat slide is taken, one or more hollow holes are processed on it, and the surface is coated; ② Another flat slide is processed into a flat slide with the same thickness; ③ The composite slide is obtained by using hot pressing or optical gluing to compound the two flat slides together. The processing technology of the invention has the advantages of simple processing, accuracy and high yield.

    10) Classification by use: microslides and cell culture slides

    11) Classified by thickness: 1mm,2mm,3mm, etc., the thickest can reach 8㎜

    Read moreDone

  • Biological laboratory glass instrument, sterilized 4-compartment cell culture slide

    Detailed description:
    1) Classification by material: float glass and quartz glass
    2) Article number classification:
    7101 frosted edge
    7102 raw edges
    7103 single concave
    7104 double concave
    7105 Single head single side frosted edge
    7105-1 Single head single side frosted raw edge
    7106 Double side single frosted edge
    7107 Single head double face frosted edge
    7107-1 Double side single side frosted raw edge
    7108 Double face scrub
    7109 Color frosting
    7110 single front frosted
    7111 Full face scrub on both sides

    3) According to whether to wash classification: wash glass and wash glass

    4) Classification by sanding Angle :45°C edging slide, 90° right Angle color slide and 8-sided chamfer slide

    5) According to the type of anti-slip classification: polylysine slide, silicon anti-slip slide and positive charge anti-slip slide

    6) Classification according to packaging specifications :50 pieces and 72 pieces

    7) Classification by polishing: polished side slide and unpolished slide

    8) Classification according to whether it can be marked; Mark slide and ordinary slide

    Mark slide: The new type discloses a mark slide, which belongs to the technical field of microscopic detection equipment. One end of the slide is provided with a layer of pressure paper, and the pressure paper is provided with a layer of plastic coating. The utility model has the advantages of simple structure and convenient use, and the specimen number can be directly recorded on the plastic laminating film with a pen, and the color number will be displayed on the pressing paper. Its number will not be unclear due to daubing or soaking during the detection process, and it is not necessary to write the number on the label paper and stick it on the slide, so that the operation is easier.

    9) Classification of the number of combinations of slides: single slide and composite slide

    Composite slide: The invention discloses a composite slide processing technology, which comprises the following steps: (1) a flat slide is taken, one or more hollow holes are processed on it, and the surface is coated; ② Another flat slide is processed into a flat slide with the same thickness; ③ The composite slide is obtained by using hot pressing or optical gluing to compound the two flat slides together. The processing technology of the invention has the advantages of simple processing, accuracy and high yield.

    10) Classification by use: microslides and cell culture slides

    11) Classified by thickness: 1mm,2mm,3mm, etc., the thickest can reach 8㎜

    Read moreDone